Eaton / Cutler-Hammer PDG12G0050TFFJ Molded Case Circuit Breaker

This breaker has a 50A rated current. Use that rating when coordinating the breaker with the circuit load and conductor ampacity, while applying the installation's load-sizing requirements.

The breaker is rated for 600VAC, so the circuit's AC operating voltage must not exceed that rating. Evaluate the interrupting rating separately at the circuit voltage.

Its interrupting rating is 35kAIC at 480VAC. For a 480VAC installation, verify that available fault current at the installation point does not exceed this interrupting rating.

Both the thermal and magnetic trip settings are fixed. The thermal-magnetic LI trip provides long-time overload protection and instantaneous short-circuit protection, so select it where fixed trip settings suit the circuit's protection requirements.

This Power Defense 1-Frame molded case circuit breaker measures 5.50 in high, 2.00 in wide and 2.99 in deep. Use these dimensions to plan its physical placement and allow separate working space for conductor routing and termination.

The Eaton PDG12G0050TFFJ has 2 poles and a single-phase rating. Check both the required pole count and circuit phase during electrical selection, rather than selecting by current rating alone.

The breaker has standard lugs on both the line and load sides. Terminate incoming conductors at the line-side lugs and outgoing conductors at the load-side lugs.