Eaton / Cutler-Hammer PDG13M0110TFFJ Molded Case Circuit Breaker

The 110A rated current is a selection point for the circuit's load and conductor protection requirements. Choose it when those requirements call for a 110A molded case circuit breaker.

The 600VAC rating guides selection by circuit operating voltage. Use it for AC applications within that voltage rating, and evaluate interrupting capacity separately at the application voltage.

At 480VAC, compare the available fault current at the installation point with the breaker's 65kAIC interrupting rating. The available fault current must not exceed that rating.

This three-pole breaker provides a separate current path through a pole for each phase of a three-phase circuit. Select it when the circuit requires protection across all three phases.

The thermal element responds to sustained overloads, while the magnetic element responds to short-circuit currents. LI means long-time and instantaneous protection, combining overload protection with rapid fault response.

Both the thermal and magnetic trip settings are fixed. Select this breaker when fixed trip behavior suits the circuit's protection requirements rather than an application requiring adjustable settings.

Standard lugs are used on both the line and load sides. Plan for lug terminations for the incoming conductors and the outgoing circuit conductors.

The Eaton PDG13M0110TFFJ measures 5.5 in high, 3 in wide and 2.99 in deep. Use these dimensions to plan physical placement and conductor routing while maintaining access to the terminals.