Eaton / Cutler-Hammer PDG23M0150VFFL Molded Case Circuit Breaker

Use its 150A rated current to evaluate the circuit's load requirements and conductor protection. Coordinate breaker selection with the conductor ampacity and applicable load-sizing requirements.

The 600VAC rating sets the rated voltage limit for AC circuit selection. Check the interrupting rating separately at the circuit's operating voltage.

The breaker is rated to interrupt fault current up to 65kA at 480VAC. For a 480VAC application, the available fault current at the installation point must not exceed that rating.

Select it for a three-phase circuit requiring breaker protection on all three phase conductors. Its three-pole configuration guides the circuit arrangement and conductor routing.

LI protection combines long-time overload protection with instantaneous short-circuit protection. The thermal element responds to sustained overloads, while the magnetic element responds rapidly to high fault current.

Both the thermal and magnetic trip settings are fixed. Select this breaker when circuit protection coordination calls for fixed trip settings rather than field-adjustable settings.

The load-side connection uses a lug to terminate the outgoing conductor. Plan the load-side wiring route and access so the conductor can be positioned and secured at the lug.

The breaker measures 6 in high, 4.12 in wide and 3.5 in deep. Use these dimensions to plan its physical footprint, allowing room for wiring access in your layout.